Thanks to recent research, we now understand a lot about headphones. But there’s one part of the headphone puzzle that I haven’t understood at all, and until a few weeks ago, neither did anyone else I’d talked with. It’s a phenomenon I call “eardrum suck,” and it occurs with some noise-canceling headphones. When you put the headphones on and activate the noise-canceling function, it can cause a feeling like riding a high-speed elevator, where you’re whisked abruptly into a region of lower atmospheric pressure, and the higher-pressure air inside your ear pushes your eardrums out slightly. For many, including me, it’s an effect so uncomfortable it can cause us to leave our expensive noise-canceling headphones in a drawer, unused.
Until recently, the models most notorious for eardrum suck have been Bose over-ear noise-canceling headphones, such as the QC25s and QC35 IIs. Yet as anyone who’s taken a commercial airline flight in the last decade can attest, these models are immensely popular. Clearly, some people either don’t experience eardrum suck, or do experience it but aren’t bothered by it.
Also, I and others noticed that the problem doesn’t seem to occur with Bose’s QC20 and QC30 noise-canceling earphones, even though those models deliver noise-canceling performance comparable to the over-ear models.
The question arose again when Sony came out late last year with the WH-1000XM3s, the first headphones I’ve found that deliver measurably better noise canceling than the Bose equivalents. Against my hopes but confirming my fears, I and some of my colleagues noticed that the WH-1000XM3s’ eardrum suck seemed about as bad as the Bose QC35 IIs’.
I’d asked some of the best minds in the headphone business to explain what’s going on, but no one was able to give me a plausible answer; “We’ve been wondering about that, too,” was the most common response. I searched around on the Internet, but none of the purported explanations (such as the idea that the noise canceling allows you to hear the blood pumping through your ears) survived more than a few moments of scrutiny.
Last fall, I even built a test rig to measure the pressure inside a headphone. But while it was sensitive enough to pick up the minuscule pressure difference caused by lightly tapping a finger on the earcup, it didn’t detect any pressure difference when I switched the noise canceling on and off. The more I thought about it, the more I realized this shouldn’t have surprised me. If there were added pressure in the headphones, the pressure would be relieved merely by shifting the earpads slightly to let the pressure leak out.
Then I remembered I’d once met an audio engineer whose previous work in headphone noise canceling has resulted in several patents. I thought that because he doesn’t work directly for a headphone manufacturer, he might be willing to shed some light. Through a mutual acquaintance, I was able to connect with him over Skype. At his request, I won’t share his name, but his comments gave me the first plausible answer I’ve found on this topic.
Before we continue, it’s important to understand how noise-canceling headphones work. In all noise-canceling headphones, there’s a microphone inside the earcup, near your ear, that picks up the sound inside the earcup, which is a mixture of the music coming from the driver plus environmental noise leaking in through the headphones. The headphones route the sound from the microphone back into the headphones’ internal circuitry, out of phase with the music signal. This cancels out most of the music signal and leaves the noise. The resulting noise signal -- which is out of phase with the environmental noise coming in through the headphones -- is then routed back into the amplifier’s input. Because the driver then reproduces this noise that’s out of phase with the environmental noise, it cancels the environmental noise.
This is called feedback noise canceling. More advanced noise-canceling headphones, such as the Bose QC35 IIs and Sony WH-1000XM3s, add feed-forward noise-canceling, which uses a microphone (or two) on the outer shell of the headphones to pick up the environmental noise. The noise signal from the microphones is inverted in phase and sent into the driver, so the noise is canceled. Combining the feedback and feed-forward systems results in the maximum possible noise canceling available with today’s technology.
At last, the answer
According to the engineer, eardrum suck, while it feels like a quick change in pressure, is psychosomatic. “There’s no actual pressure change. It’s caused by a disruption in the balance of sound you’re used to hearing,” he explained. “People sometimes report the same effect when they go into anechoic chambers, which absorb high frequencies but allow low frequencies to come through. With noise-canceling headphones, it’s the opposite -- you’re canceling the bass but not the high frequencies -- but it can have the same effect.”
Until recently, the models most notorious for eardrum suck have been Bose over-ear noise-canceling headphones, such as the QC25s and QC35 IIs. Yet as anyone who’s taken a commercial airline flight in the last decade can attest, these models are immensely popular. Clearly, some people either don’t experience eardrum suck, or do experience it but aren’t bothered by it.
Also, I and others noticed that the problem doesn’t seem to occur with Bose’s QC20 and QC30 noise-canceling earphones, even though those models deliver noise-canceling performance comparable to the over-ear models.
The question arose again when Sony came out late last year with the WH-1000XM3s, the first headphones I’ve found that deliver measurably better noise canceling than the Bose equivalents. Against my hopes but confirming my fears, I and some of my colleagues noticed that the WH-1000XM3s’ eardrum suck seemed about as bad as the Bose QC35 IIs’.
I’d asked some of the best minds in the headphone business to explain what’s going on, but no one was able to give me a plausible answer; “We’ve been wondering about that, too,” was the most common response. I searched around on the Internet, but none of the purported explanations (such as the idea that the noise canceling allows you to hear the blood pumping through your ears) survived more than a few moments of scrutiny.
Last fall, I even built a test rig to measure the pressure inside a headphone. But while it was sensitive enough to pick up the minuscule pressure difference caused by lightly tapping a finger on the earcup, it didn’t detect any pressure difference when I switched the noise canceling on and off. The more I thought about it, the more I realized this shouldn’t have surprised me. If there were added pressure in the headphones, the pressure would be relieved merely by shifting the earpads slightly to let the pressure leak out.
Then I remembered I’d once met an audio engineer whose previous work in headphone noise canceling has resulted in several patents. I thought that because he doesn’t work directly for a headphone manufacturer, he might be willing to shed some light. Through a mutual acquaintance, I was able to connect with him over Skype. At his request, I won’t share his name, but his comments gave me the first plausible answer I’ve found on this topic.
Before we continue, it’s important to understand how noise-canceling headphones work. In all noise-canceling headphones, there’s a microphone inside the earcup, near your ear, that picks up the sound inside the earcup, which is a mixture of the music coming from the driver plus environmental noise leaking in through the headphones. The headphones route the sound from the microphone back into the headphones’ internal circuitry, out of phase with the music signal. This cancels out most of the music signal and leaves the noise. The resulting noise signal -- which is out of phase with the environmental noise coming in through the headphones -- is then routed back into the amplifier’s input. Because the driver then reproduces this noise that’s out of phase with the environmental noise, it cancels the environmental noise.
This is called feedback noise canceling. More advanced noise-canceling headphones, such as the Bose QC35 IIs and Sony WH-1000XM3s, add feed-forward noise-canceling, which uses a microphone (or two) on the outer shell of the headphones to pick up the environmental noise. The noise signal from the microphones is inverted in phase and sent into the driver, so the noise is canceled. Combining the feedback and feed-forward systems results in the maximum possible noise canceling available with today’s technology.
At last, the answer
According to the engineer, eardrum suck, while it feels like a quick change in pressure, is psychosomatic. “There’s no actual pressure change. It’s caused by a disruption in the balance of sound you’re used to hearing,” he explained. “People sometimes report the same effect when they go into anechoic chambers, which absorb high frequencies but allow low frequencies to come through. With noise-canceling headphones, it’s the opposite -- you’re canceling the bass but not the high frequencies -- but it can have the same effect.”
by Brent Butterworth, Soundstage! Solo | Read more: